Using Glitter Heat Transfer Vinyl with Kathy

Hi Everyone!  It’s Kathy today with a fun tutorial using the new Silhouette Glitter Heat Transfer Vinyl.  This medium is perfect for making custom t-shirts, and bags but I thought it would be fun to do a pillow for a friend!  Take a peek…

I found a great, easy tutorial to make an envelope pillow cover here on YouTube.  I followed the directions but before I stitched the pillow cover together, I did the following to decorate the front.

 First, I decided on my design and laid it all out in the Silhouette Studio.  I used the word “love” and some hearts from Lori’s Homespun Hearts collection.  When cutting words from heat transfer material, make sure to mirror the image (select Object from the menu, then Mirror) because you cut the back of the transfer material.

I chose to work with the White Silver, Red and Hot pink Glitter Heat Transfer.

If you like, you can load the Glitter Heat Transfer material directly into your Silhouette without a mat, using the Load Media button.  I chose to use my mat, since I was using smaller pieces of the material.  The load media is great if your cut is larger than 12 x 12.    Change your cut settings to Heat Transfer Material, Flocked. (It’s the same for the Glitter) and your blade to a depth of 3.  Be sure to put your material on your mat shiny side down (you’re cutting the back).

Once you’ve cut your image, you want to peel off the “negative” sections of your material so that only your image remains on the plastic transfer sheet.  If you have small sections that are hard to peel with your fingers, you can use a piercer or hook to snag those sections.  I did this with my letters, putting the image over a piercing mat to make it easier.

Next, I laid all my cut pieces out on the cover fabric to get the perfect placement.

A little trick…to make sure you leave space for your stitching seam allowance ( in my case 1/2 inch), put some 1/2 inch washi tape around the edges.  This way you can see exactly how much space you have!

Now for the fun part…Ironing the design to the front of the pillow cover!  I preheated my iron to the cotton setting. (no steam)  Place your design on your fabric.  When layering it is best to do one layer at a time starting with the bottom. (my silver heart for example).    Cover the transfer material with a scrap piece of fabric and iron the design for 45 – 60 seconds.

Check to make sure all of your design has transferred to the fabric by carefully lifting the transfer sheet. (it can be hot!!) If it doesn’t peel off easily, place it back down and iron for a bit more time.

Once your design is all ironed on, you can finish stitching your pillow cover together according to the instructions above.

Here is the finished pillow!  It was really easy to make, I don’t sew fabric a lot but it’s really just a series of straight lines!  My friend doesn’t know this is coming her way…I’m wondering if she’ll know it’s for her!!

That’s it for me today!  Thanks for stopping by!

Die Cutting, Fabric, Tutorial, ,

5 Comments

  1. I like very much those designs I used my cameo to make some designs of my own for Halloween also I did some socks with some reflective vinyl for my little ones, I kind o went everywhere, but still looking for a great website to buy I try World-Paper like 3 months ago they were a little bit expensive now looks like they are lower than eBay this is a jewel for all those who nickel and dime to be able to get the most profit

    Do you Know about a better one with the prices I’m looking the best price for some siser easyweed and if You know another good brand of HTV I used the gold and the lime a lottt. and I got tired of buying of Ebay and Amazon Delivery time Is a Headache… to many Late Orders Cant deal with it!!

    Thanks for your help!

Comments are closed.